SHOWTEC Phantom 250 Spot User's Guide download pdf (Page 22)

128-191

Clockwise rotation (CW) rainbow effect from slow to fast

192-255

Counter-clockwise rotation (CCW) rainbow effect from slow to fast

Channel 7 – Gobo rotation

0-7

No Rotation

8-119

Clockwise rotation (CW) from slow to fast

120-231

Counter-clockwise rotation (CCW) from slow to fast

232-255

Gobo bouncing

Channel 8 – Prism

0-15

Open

16-255

3-facet Prism Effect

Channel settings

Fig. 6

Maintenance

The operator has to make sure that safety-relating and machine-technical installations are to be

inspected by an expert after every year in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are to be

inspected by a skilled person once a year.

The following points have to be considered during the inspection:

1. All screws used for installing the device or parts of the device have to be tightly connected and must

not be corroded.

2. There may not be any deformations on housings, fixations and installation spots.

3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing.

4. The electric power supply cables must not show any damages or material fatigue.

The Showtec Phantom 50 LED Spot requires almost no maintenance. However, you should keep the unit

clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power

supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass

cleaner and a soft cloth. Do not use alcohol or solvents. The front lens will require weekly cleaning, as

smoke-fluid tends to build up residues, reducing the light-output very quickly.

The cooling-fans, colour-wheel, the gobowheel, the gobos and the internal lenses should be cleaned

monthly with a soft brush.

Please clean internal components once a year with a light brush and vacuum cleaner.

Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections

with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying

electric power.

1 2 ... 17 18 19 20 21 22 23 24 25 26

No comments

SHOWTEC Phantom 250 Spot User's Guide Page 22