SHOWTEC Phantom 250 Spot User's Guide download pdf (Page 13)

Channel 13 – Prism

0-15

No rotation

16-239

Backwards rotation from fast to slow

240-255

Prism

Channel 14 – Focus

0-255

From close distance to far distance

The Phantom can be operated with a controller in control mode or without the controller in stand-alone

mode.

Control Panel

When the indicator light is on, means the Phantom is working

Fig. 6

A. LED D. [CHOOSE] Button

B. Display E. Up Button

C. [ENTER] Button F. Down Button

Control Mode

The fixtures are individually addressed 001-512 on a data-link and connected to the controller.

The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,

the controller will display the saved DMX address the next time.)

DMX Addressing

The control panel on the front side of the base allows you to assign the DMX fixture address, which is the

first channel from which the Phantom will respond to the controller.

Please note when you use the controller, the unit has 14 channels.

When using multiple Phantoms, make sure you set the DMX addresses right.

Therefore, the DMX address of the first Phantom should be 1(A001); the DMX address of the second

Phantom

should be 1+14=15 (A015); the DMX address of the third Phantom should be 15+14=29 (A029), etc.

Please, be sure that you don’t have any overlapping channels in order to control each Phantom

correctly.

If two or more Phantoms are addressed similarly, they will work similarly.

For address settings, please refer to the instructions under ”Addressing’ (menu )

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

No comments

SHOWTEC Phantom 250 Spot User's Guide Page 13