SHOWTEC Indigo 150 LED User's Guide download pdf (Page 10)

Multiple Indigo’s (Master/Slave control)

1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.

2. Use a 3-p XLR cable to connect the Indigo.

The pins:

1. Earth

2. Signal -

3. Signal +

3. Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out"

socket to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.

You can use the same functions on the master device as described on page 14 (Built-in Programs,

or Music control). This means on the master device you can set your desired operation Mode

and all slave devices will react the same as the master device.

Multiple Indigo’s (Master/Slave control)

Fig. 3

Multiple Indigo’s (DMX Control)

1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation.

2. Always use a safety cable.

3. Use a 3-p XLR cable to connect the Indigo‟s and other devices.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

SHOWTEC Indigo 150 LED User's Guide Page 10