SHOWTEC MiniMax 250 User's Guide download pdf (Page 10)

Data Cabling

To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables

directly from a dealer/distributor or construct your own cable. If you choose to create your own cable

please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic

interference.

DAP Audio Certified DMX Data Cables

• DAP Audio Basic microphone cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p.

Ordercode FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).

• DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by

Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).

One Mini Max LED White

1. Fasten the moving head onto firm trussing (Use a proper clamp fastened onto the Mini Max LED White).

Leave at least 1 meter on all sides for air circulation.

2. Plug one end of the electric mains power cord into the IEC socket on the unit.

Then plug the other end of the cord into a proper electric power supply socket.

3. To set the program to be played, see page 9 for the menu settings

Multiple Mini Maxs LED White

1. Fasten the effect light onto firm trussing (Use a proper clamp fastened onto the Mini Max LED White).

Leave at least 1 meter on all sides for air circulation.

2. Use a 3-p XLR cable to connect the Mini Max LED White and other devices.

3. Link the units as shown in (figure 3), Connect a DMX signal cable from the first unit's DMX "out" socket to

the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.

4. Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the other

end of the mains power cord into proper electric power supply sockets, starting with the first unit.

Do not supply power before the whole system is set up and connected properly.

Multiple Mini Max LED White Set Up

Fig. 3

Note : Link all cables before connecting electric power

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

SHOWTEC MiniMax 250 User's Guide Page 10