7
Installation
Remove all packing materials from the LED Wash Ultra Bright Compact RGB. Check that all foam and
plastic padding is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Note : Link all cables before connecting electric power.
Control Modes
There are 4 Modes: 1) Built-in Programs (Cross Fade Program 1 + 2)
2) Sound-controlled
3) Master/Slave
4) DMX512
Overview Dipswitch Setting
Color changing Program 1 (both ways)
Color changing Program 2 (switch auto)
Color changing via sound-activation (switch auto)
One LED Wash Ultra Bright Compact RGB (Manual Color or Built-in Cross Fade Programs)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Plug the cord into a proper electric power supply socket. When the LED Wash is not connected by a
DMX-cable and dipswitch #10 is set to OFF, it functions as a stand-alone device.
Manual Color
Set Dipswitch #1-6 to ON to adjust the desired color. The Auto/Music switch has no function.
Red Green Blue
Dipswitches 1-2: Red intensity level (1 on = 50%, 2 on = 75%, 1-2 on = 100%)
Dipswitches 3-4: Green intensity level (1 on = 50%, 2 on = 75%, 1-2 on = 100%)
Dipswitches 5-6: Blue intensity level (1 on = 50%, 2 on = 75%, 1-2 on = 100%)
Built-in Cross Fade Program 1
Set the switch to AUTO, Dipswitch #9 to ON and use dipswitch #1-6 to adjust the speed.
Cross Fade Program: Dipswitch #9 to ON
Speed control: Dipswitch #1-6 (from slow to fast)
Comments to this Manuals